Polyurea Waterproofing Coating
Polyurea coating technology constitutes a more recent and advanced system than the traditional ones used in waterproofing and protective coating applications.
The Polyurea technology is based on the reaction of an isocyanate component with an amine blend.
Area of Application:
It is widely used for:
- Protective coating
Environment Friendly
Developed in new and alternative technologies.
Product Details
Polyurea coating technology constitutes a more recent and advanced system than the traditional ones used in waterproofing and protective coating applications.
The Polyurea technology is based on the reaction of an isocyanate component with an amine blend. The isocyanate can be of aromatic or aliphatic composition. This reaction is rapid, proceeding to completion within a few seconds, thus requiring specialized mixing equipment to be used by an application crew.
Polyurea coating comes many times faster than other waterproofing coatings. The gel time of polyurea is achieved within seconds, allowing foot traffic after a few minutes.
Impressive chemical resistance like elongation, tensile strength, tear strength, abrasion resistance, and crack-bridging ability. Almost no relevant coating product is capable of comparing to Polyurea coatings.
Low substrate requirement. Even humidity or residual moisture has little to no effect on adhesion or coating performance.
Thermal stability to temperature variations. Weather variations hardly influence coating performance or adhesion properties.
Solvent free consisting of up to 98% solids formula.Environmentally friendly
How To Use
Substrate Preparation:
All substrates must be sound, dry, free from grease, dirt, or other contaminants, and must be reasonably smooth.
Mixing:
WD007 Polyurea Waterproofing Coating is a two-part system that consists of a base material and a catalyst. To apply the coating, the base material and catalyst must be mixed together in the correct ratio accordingly to our instructions.
Application:
The mixture should then be applied to the surface using a brush, roller, or sprayer. Once the coating has been applied, it should be allowed to dry for at least 24 hours before being exposed to moisture or other elements.
To ensure the best results, it is important to follow the manufacturer’s instructions when applying the coating.
Note:
Additionally, it is important to wear protective gear such as gloves, goggles, and a respirator when applying the coating.
WD007 Polyurea Waterproofing Coating is a two-part system that consists of a base material and a catalyst. To apply the coating, the base material and catalyst must be mixed together in the correct ratio accordingly to our instructions. Note that it is important to wear protective gear such as gloves, goggles, and a respirator when applying the coating.
Let's build together a better business
